Pool pump replacement costs in Phoenix
Think of the fix as a three-step ladder. Step one is a small part (basket, lid, impeller, timer, seal or capacitor). Step two is a motor swap. Step three is a complete pump, with variable speed at the very top.
The table below puts the rungs side by side. Where a figure comes from a named source, it is cited. Where no source supports a number, the cell says so, because a fair price for those jobs depends on your pad and needs a written quote.
| Level | Typical cost range (installed) | What is included | When it makes sense | Source |
|---|---|---|---|---|
| Basket or lid replacement | Not sourced; usually a parts-counter item, get a quote if a tech is needed | Part only, often DIY | Cracked or warped parts, no other symptoms | Manufacturer parts catalog |
| Timer replacement | Not sourced; varies by timer versus controller | Timer, plus electrical labor | Timer fails but the pump runs on manual | Licensed contractor quote |
| Impeller replacement | Not sourced as a separate line | Pump opened up, part, labor | Cracked or worn impeller, not just clogged | Licensed contractor quote |
| Seal or capacitor repair | $200 to $400 for minor pump repairs, or $200 to $600 for pump repair, per two Phoenix-area companies' own websites (checked October 2026) | Diagnosis, part, labor | Leaking seal, humming motor that won't start | Phoenix-area pool company websites |
| Motor replacement | $350 to $700 on one Phoenix company's site; $400 to $750 in a second published guide[2] | Motor, labor | Wet end is sound and only the motor failed | Phoenix-area company site; RoadRunner Pool Service |
| Single-speed pump replacement | Not sourced; ask for an itemized quote | Pump, install, disposal | Older single-speed pump with multiple failing parts | Written quote |
| Variable-speed pump replacement | $1,400 to $2,800 installed before rebates[2]; $1,500 to $2,800 in another Phoenix guide[1] | Pump, electrical connections, programming, plumbing changes if needed | Pump is old, or you want lower operating cost | RoadRunner Pool Service; PoolFix |
What drives the spread
Horsepower, single versus variable speed, plumbing changes at the pad, electrical work and the split between parts and labor all move the total. Retail listings show only the box.
Price factors
What changes the price
Horsepower
Larger pumps cost more
Single versus variable speed
Variable speed sits at the top of the ladder
Plumbing at the pad
Unions and PVC changes add to the total
Electrical work
Wiring and connections add labor
Find out which rung you're on before you start. Start with Pool Pump Not Working? Priming, Seal and Capacitor Checks, since the symptom tells you which bracket applies.
Pool pump repair and part replacement prices
Small repairs are the cheapest place to stop, and several are within reach of a handy homeowner. Phoenix-area pool companies' own websites, checked October 2026, print $200 to $400 for minor pump repairs and $200 to $600 for pump repair generally. One site lists equipment repair at $80 per hour plus parts, with a 30-minute minimum.
Basket, lid, impeller and timer
A basket or lid is usually a DIY swap. Match the part to your pump's make and model, since baskets and lids are not universal.
An impeller sits inside the housing, so the pump has to be opened up. A clogged impeller is a cleaning job, not a replacement, so ask whether the tech found a cracked or worn part or just debris.
Pro tip
Ask the tech to name the failed part and show it to you. A clogged impeller needs cleaning, not replacing.
A basic timer is not the same as an automation controller, and wiring either is electrical work.
Arizona's R-6 residential pool and spa service classification stops at the first disconnect for electrical work[1], so a timer rewire may call for a licensed electrician or a broader pool classification.
Seals and capacitors
A leaking shaft seal and a failed start capacitor are two of the most common causes behind a pump that hums, drips or won't start. Both usually need a technician, and both are far cheaper than replacing the pump.
Pool pump motor replacement pricing
A motor-only swap makes sense when the wet end (housing, impeller and seal) is sound and only the motor died. One Phoenix company's site lists motor rebuilding or replacement at $350 to $700, and another published guide puts motor replacement at $400 to $750[2].
What must match? Horsepower, frame size, voltage and compatibility with the rest of the wet end. A mismatch is a common reason owners get pushed toward a full pump.
Labor is usually quicker than a whole-pump install, since the plumbing stays put.
One caution: a new motor bolted to an old housing, seal and impeller can leave you with a pump that fails again soon. Ask the tech what condition the wet end is in before you approve a motor-only fix.
Side by side
Motor-only swap versus whole pump
Motor-only swap
- Wet end is sound
- Plumbing stays put
- Quicker labor
Whole pump
- Old housing, seal and impeller replaced too
- Warranty on the full unit
- Option to move to variable speed
Price of a new or variable-speed pool pump
Equipment alone and installed price are two different numbers. Pump-only prices for named Hayward and Pentair variable-speed models run roughly $1,300 to $2,700 before installation and programming. Examples include the Pentair IntelliFlo3 VSF at $1,299.99 and the Hayward MaxFlo VS at $1,749[3].
Installed, one Phoenix company lists $1,500 to $2,800 for variable-speed replacement, including electrical connections, plumbing modifications when needed and programming. Its model-specific ranges are Pentair IntelliFlo $1,800 to $2,800, Hayward MaxFlo VS $1,500 to $2,200 and Jandy VS FloPro $1,600 to $2,400[1].
An Arizona guide splits entry models at $1,600 to $2,200 and premium models at $2,300 to $2,800. It adds $400 to $900 for tying the pump to an automation controller[4].
Price range
Installed variable-speed pump ranges
| Item | Low | High |
|---|---|---|
| Pentair IntelliFlo | $1,800 | $2,800 |
| Hayward MaxFlo VS | $1,500 | $2,200 |
| Jandy VS FloPro | $1,600 | $2,400 |
| Entry models | $1,600 | $2,200 |
| Premium models | $2,300 | $2,800 |
Extras add up quickly: new unions, PVC changes, an electrical whip and compatibility work with your existing automation. Whether any of it needs a permit depends on your city.
On savings, check APS and SRP directly for current variable-speed rebates rather than assuming one applies.
Replacing the filter at the same time? See pool filter repair and replacement, since doing both in one visit can simplify the plumbing.
When a pump repair stops being worth it
There is no clean percentage rule. Weigh these factors instead:
- Pump age and how many repairs you've already paid for
- Whether the damage is in the motor or the wet end (housing, seal, impeller)
- Noise, which often points to worn bearings
- Whether you want variable speed anyway
Ask for both a repair quote and a replacement quote, and compare them against the table above. When the repair is only modestly cheaper than a new pump with a warranty, replacement often wins. When the failure is a single cheap part on an otherwise healthy pump, repair wins easily.
Before approving a replacement, rule out the cheap causes. A suction-side air leak, a clogged impeller or a priming problem can mimic a dead motor.
Phoenix pump quotes and who is licensed to do the work
Arizona requires a Registrar of Contractors (ROC) license for pool repair work. The R-6 or CR-6 class covers service and minor repair, while B-5, B-6, KA-5 or KA-6 cover broader pool work[1]. Our guide to R-6, B-5 and KA-5 license classes explains the differences.
Look up the contractor at roc.az.gov/before-hire and confirm the class, bond and Recovery Fund status. A contract over $1,000 must be in writing with the license number, price and payment terms (A.R.S. 32-1158).
A fair quote itemizes:
- Exact pump model and horsepower
- Labor, and any electrical work
- Unions, PVC and the electrical whip
- Removal and disposal of the old pump
- Programming, taxes and warranty terms
- Who pulls the permit
ROC does not require general liability insurance, so "licensed, bonded and insured" in an ad proves little. See what that phrase does and doesn't cover.
Key takeaways
- Repairs are the cheapest rung, and motor swaps cost more
- Installed variable-speed pumps run $1,500 to $2,800 in one Phoenix guide
- Ask for an itemized written quote
- Verify the contractor's ROC license before you hire
If you're ready for a written, itemized quote, start with pool pump repair and replacement.
Pool pump replacement cost FAQ
How much does it cost for a new pool pump?
It depends on single, two or variable speed, plus plumbing and electrical work. Installed variable-speed ranges are in the variable-speed section, and every other tier needs a written quote.
How long does an inground pool pump last?
Lifespan varies with the model and how it's maintained. Check the manufacturer's warranty and PHTA guidance for your pump, then see when repair stops making sense.
How much does it cost to replace a pool pump timer?
Cost depends on whether you have a simple timer or an automation controller. Timer wiring is electrical work, so confirm who is licensed to do it, as covered in the repair section.
Can I replace just the pool pump motor instead of the whole pump?
Yes, if the housing, seal and impeller are sound. A replacement kit or motor swap must match horsepower, frame size and voltage, as outlined in the motor section.
How much does pool pump impeller replacement cost?
An impeller job needs the pump opened up, so labor matters. A clogged impeller only needs cleaning, so ask for a written quote that names the part.
Do I need a licensed contractor to replace a pool pump in Arizona?
Generally yes. Unlicensed work is exempt only if it is casual, minor, under $1,000 in total and needs no permit (A.R.S. 32-1121). See the licensing section for classes and how to verify.
Questions
- PoolFix. "Pool Services." https://www.poolfix.com/pool-pump-repair. Accessed October 17, 2026.
- RoadRunner Pool Service. "Pool Repair Costs in Phoenix: 2026 Complete Guide." https://roadrunnerpoolservice.com/Pool-Repair-Costs-in-Phoenix-2026-Complete-Guide.html. Accessed October 17, 2026.
- Blue Lagoon Pool Management. "Variable Speed Pool Pump Cost in Gilbert: 2026 Prices." https://bluelagoonpm.com/variable-speed-pool-pump-gilbert-az/. Accessed October 17, 2026.
- AE Outdoor Living. "Variable-Speed Pool Pumps in Arizona — Real Savings & Cost." https://aeoutdoorliving.com/answers/variable-speed-pool-pump-arizona. Accessed October 17, 2026.
